HP 1B, 2B, 71450B NENTERNNNNNNNN, To change the HP-IBaddress from the front panel, 1.Press 4DISPLAY5, NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNAddress Map

Learning the Basics

Preparing the OSA

To change the HP-IB address from the front panel

The HP-IB address can be changed at the front panel when the OSA module's SWITCHES/MEMORY switch is set to MEM. (This is the default factory setting.)

1.Press 4DISPLAY5, NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNAddress Map .

2.With the front-panel knob, position the box around the OSA module, then

press NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNHP-IB ADDRSET .

3.Enter the HP-IB address using the front-panel numeric keypad, then press

NENTERNNNNNNNN.

The current HP-IB address is shown inside the OSA module box on the address map. Changing the HP-IB address from the front-panel does not a￿ect the HP-MSIB address of the module.

1-9