Language Reference

PDMEAS

Measure the ￿atness of a photodiode under test.

N O T E

This command is only available for systems using the HP 70951A module.

Before the command is executed, perform the following steps:

1.Connect the front-panel MONOCHROMATOR OUTPUT to the PHOTODETECTOR INPUT with a ￿ber-optic cable.

2.Press NSTORENNNNNNNNNNNNNNNNNNTHRUNNNNNNNNNNNNNNNNN-NN>NNNNNBNNNN.

3.Connect the ￿ber-optic cable to the photodiode under test which is connected to TRANS0Z IN on the rear panel.

Item

Description

Requirement

HP 70951A module

Preset State

OFF

7-370