Entering Data from the Front P anel

Data may be entered from the front panel when the OSA is under remote control by using the EP (enable) argument with a command. EP halts execution of analyzer commands so that values may be entered with the

front-panel numeric keypad, step keys, knob, and unit-code keys. Data may be entered from the front-panel until the NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNACCEPT VALUE key is pressed. The

syntax diagrams in Chapter 7 provide the commands that can be followed by EP.

To allow front-panel data entry

￿Use the EP argument with a compatible command.

40OUTPUT 723;"LG 20DB;" Set the log scale to 20 dB/division.

50 OUTPUT 723;"LG EP;"

Change the log scale with the front-panel keys. Enter

 

a number, then press ACCEPT VALUE

 

FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

1-21