Learning the Basics
3.To measure an LED laser source and obtain measurement data, enter the following command lines:
30 | OUTPUT 723;"AUTOMEAS;" | Locate and display the output of the laser source . | |
40 | OUTPUT | 723;"LED_;" | Measure the output of the LED source . |
50 | OUTPUT | 723;"LED_ ?;" | Return the measurement data. |
4.To set the right and left power integration points on a signal, enter the following command lines:
10 | OUTPUT 723;"CENTERWL 900NM;" | Set the center wavelength to 900 nm. | |
20 | OUTPUT | 723;"TS;" | Update the current trace . |
30 | OUTPUT | 723;"AMPMKR 010,dB;" | Set the right and left power integration |
|
|
| points 010 dB from the peak. |