Intel 845 manual DRTC-DRAM Read Thermal Management Control Register Device

Register Description

R

3.6.24DRTC—DRAM Read Thermal Management Control Register (Device 1)

Address Offset:		58–5Fh
Default Value:		0000_0000_0000_0000h
Access:		R/W/L
Size:		64 bits
Bit		Descriptions
63:41	Reserved.
40:28	Global Read Hexword Threshold (GRHT). The thirteen-bit value held in this field is multiplied by
	215 to arrive at the number of hexwords that must be written within the Global DRAM Read
	Sampling Window to cause the thermal management mechanism to be invoked.
27:22	Read Thermal Management Time (RTMT). This value provides a multiplier between 0 and 63
	that specifies how long counter-based read thermal management remains in effect as a number
	of Global DRAM Read Sampling Windows. For example, if GDRSW is programmed to
	1000_0000b and RTT is set to 01_0000b, then read thermal management will be performed for
	8192*105 host clocks (@ 100 MHz) seconds once invoked (128 * 4*105 host clocks * 16).
21:15	Read Thermal Management Monitoring Window (RTMMW). The value in this register is
	padded with four 0s to specify a window of 0–2047 host clocks with 16-clock granularity. While
	the thermal management mechanism is invoked, system memory reads are monitored during this
	window. If the number of hexwords read during the window reaches the Read Thermal
	Management Hexword Maximum (bits 14:3), then read requests are blocked for the remainder of
	the window.
14:3	Read Thermal Management Hexword Maximum (RTMHM). This field defines the maximum
	number of hexwords between 0–4095 that are permitted to be read from system memory within
	one Read Thermal Management Monitoring Window.
2:1	Read Thermal Management Mode (RTMMode).
	00 = Thermal management via counters and Hardware Thermal Management_on signal
	mechanisms disabled.
	01 = Hardware Thermal Management_on signal mechanism is enabled. In this mode, as long as
	the Thermal Management_on signal is asserted, read thermal management is in effect
	based on the settings in RTMW and RTHM. When the Thermal Management_on signal is
	deasserted, read thermal management stops and the counters associated with the RTMW
	and RTHM are reset. When the hardware Thermal Management_on signal mechanism is
	not enabled, the Thermal Management_on signal has no effects.
	10 = Counter mechanism controlled through GDRSW and GRHT is enabled. When the threshold
	set in GDRSW and GRHT is reached, thermal management start/stop cycles occur based
	on the settings in RTT, RTMW and RTHM.
	11 = Reserved.
0	START Read Thermal Management (SRTM). Software writes to this bit to start and stop read
	thermal management.
	0 = Read thermal management stops and the counters associated with RTMW and RTHM are
	reset.
	1 = Read thermal management begins based on the settings in RTMW and RTHM, and remains
	to be in effect until this bit is reset to 0.

Intel® 82845 MCH for SDR Datasheet 95