Intel Intel NetStructure Single Board Computer, MPCBL0010 manual Keying, OEM Ipmi Commands

						MPCBL0010 SBC—Hardware Management Overview
E8	E9 EA EB EC ED				EE EF
F0	F1	F2	F3	F4 F5	F6	F7
F8	F9 FA c1
C1					// Record Type ID == 0xC1 == customer area OEM record
82					// Version Information
40					// Record Length
60					// Record Checksum (zero checksum)
1D					// Header Checksum (zero checksum)
5A	31 00				// Manufacturer ID - 64 byte record length includes
					// Manufacture ID
40	41 42		43	44 45	46	47// 61 bytes of data
30	31	32	33	34 35	36	37
38	39	30	31	32 33	34	35
5A	59	58	57	56 55	54	53
52	51	50	4F	4E 4D	4C	4B
4A	49	48	47	46 45	44	43
42	41	40	39	38 37	36	35
34	33 32		31	C1

10.7E-Keying

E-Keying is specified in the PICMG 3.0 requirements to prevent board damage, prevent mis-operation, and to verify fabric compatibility. The FRU data contains the board point-to-point connectivity record as described in Section 3.7.2.3 of the PICMG 3.0 specification.

Additional E-Keying is provided for connectivity between the AdvancedMC carrier and the AdvancedMC slots as described the in Section 3.9 and 3.7 of the AdvancedMC.0 RC.1.1 specification. The Set/Get AdvancedMC Port State IPMI commands defined by the AdvancedMC.0 specification are used for either granting or rejecting E-keys.

10.8OEM IPMI Commands

This section documents the OEM-style IPMI commands implemented and supported on the MPCBL0010 SBC.

Intel NetStructure® MPCBL0010 Single Board Computer
Technical Product Specification	October 2006
130	Order Number: 304120