Intel NetStructure® MPCBL0010 Single Board Computer
October 2006 Technical Product Specification
Order Number: 304120 67
BIOS Setup—MPCBL0010 SBC
7.3.2.1 Primary IDE Master/Slave Configuration Options

Tabl e 31 shows the IDE Master/Slave configuration options.

Hard Disk Write Protect Disabled
Enabled Enable/Disable Hard Disk device write protection. This is
effective only if the device is accessed through BIOS.
IDE Detect Time Out
0
5
10
15
20
25
30
35
Select the time out value for detecting ATA/ATAPI device(s).
Note: Bold text indicates default setting.

Table 30. IDE Configuration Sub-Menu (Continued)

Feature Options Description

Table 31. IDE Master/Slave Sub-Menu

Feature Options Description
Device Display IDE device.
Vendor Display IDE vendor name.
Size Display IDE device size.
LBA Mode Display IDE LBA Mode status.
Block Mode Display IDE Block Mode status.
PIO Mode Display PIO Mode status.
Async DMA Display Async DMA status.
Ultra DMA Display Ultra DMA-5 status.
S.M.A.R.T Display S.M.A.R.T status.
Type
Not installed
Auto
CDROM
ARMD
Select the type of IDE device connected.
LBA/Large Mode Disabled
Auto
Disable: Disable LBA ModeAuto: Enable the LBA Mode if the
device supports it and the devices is not already formatted with
LBA Mode disable.
Block (Multi-Sector
Transf er) Disabled
Auto
Disable: The data transfer from and to the device occurs one
sector at a time. Auto: The data transfer from and to the
device occurs multiple sectors at a time if the device supports
it.
PIO Mode Auto
0/1/2/3/4 Select PIO Mode.