Serial Over LAN
Use "ipmitool lan print 2" to display the configuration for the second Ethernet channel (This Ethernet port is connected to the Ethernet switch located in Slot #8 on the MPCH0001 chassis)
root@DRBlade14:/usr/bin# ipmitool lan print 1
Set in Progress | : Set Complete | ||
Auth Type Support | : NONE MD2 MD5 PASSWORD | ||
Auth Type Enable | : Callback : | ||
| : User |
| : |
| : Operator | : | |
| : Admin | : | |
| : OEM |
| : |
IP Address Source | : Unspecified | ||
IP Address | : 10.90.90.14 | ||
Subnet Mask | : 255.255.255.0 | ||
MAC Address | : 00:0e:0c:98:55:6e | ||
SNMP Community String | : |
|
|
IP Header | : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 | ||
BMC ARP Control | : ARP Responses Disabled, Gratuitous ARP Disabled | ||
Gratituous ARP Intrvl | : 2.0 seconds | ||
Default Gateway IP | : 0.0.0.0 |
| |
Default Gateway MAC | : 00:00:00:00:00:00 | ||
Backup Gateway IP | : 0.0.0.0 |
| |
Backup Gateway MAC | : 00:00:00:00:00:00 | ||
RMCP+ Cipher Suites | : None |
|
|
Cipher Suite Priv Max | : XXXXXXXXXXXXXXX | ||
| : | X=Cipher Suite Unused | |
| : | c=CALLBACK | |
| : | u=USER | |
| : | o=OPERATOR | |
| : | a=ADMIN | |
11.8.2.5Ending an SOL Session
In order to use the front panel serial console port on the target blade, end the SOL session.
1.Type: ~.
| Intel NetStructure® MPCBL0010 Single Board Computer |
October 2006 | Technical Product Specification |
Order Number: 304120 | 159 |
