MPCBL0010 SBC—Hardware Management Overview
Intel NetStructure® MPCBL0010 Single Board Computer
Technical Product Specification October 2006
134 Order Number: 304120
10.8.3 Set Control State

This command sets the state of a control pin and overrides the control pin’s auto state.

10.8.4 Get Control State

This command gets the state of a control pin.

10.8.5 Controls Identifier Table

The Controls Identifier Table lists the control identifiers that can be used with Set/Get

Control State IPMI commands to query or set information on certain controls in the

firmware.

Response
Data
1 Completion Code
2-4 Intel IANA number (0x000157)
LSB first, MSB last
5-8
Device channel/port selection. Many connections can be
set per device.
- Bit Offset -
(16-31) - Reserved
15 - Back plane Fabric Channel 2 Port 3
14 - Reserved
13 - Back plane Fabric Channel 2 Port 1
12 - Back plane Fabric Channel 2 Port 0
11 - Back plane Fabric Channel 1 Port 3
10 - Reserved
09 - Back plane Fabric Channel 1 Port 1
08 - Back plane Fabric Channel 1 Port 0
(06-07) - Reserved
05 - Back plane Base Channel 2 Port 0
04 - Back plane Base Channel 1 Port 0
(03) - Reserved
00 - Disable

Table 118. GetBoardDevicePossibleSelection (Continued)

Table 119. Set Control State

Request Data
1 Control Number
2
Control State
00h - De-assert
01h - Assert
FFh - Don't change setting
03h - FEh - Reserved
Response Data 1 Completion Code

Table 120. Get Control State

Request Data 1 Control Number
Response Data 1 Completion Code