Intel NetStructure® MPCBL0010 Single Board Computer
October 2006 Technical Product Specification
Order Number: 304120 75
BIOS Setup—MPCBL0010 SBC

Tabl e 40 shows MPS Configuration options.

7.3.9 On-board Devices Configuration Sub-Menu

To access this sub-menu, select Advanced on the menu bar, then On-board Devices

Configuration.

MPS Configuration

ATCA Channel Routing (PICMG)

On-board Devices Configuration

PCI Express Configuration

Remote Access Configuration

IPMI Configuration

USB Configuration

Table 40. AdvancedTCA Channel Routing (PICMG) Sub-Menu

Feature Options Description
Actual LAN A Port State Displays port state based on E-key granting from the
AdvancedTCA shelf manager.
Fabric LAN A Port Setting Disabled
Fabric Ch1 Port
0
Select built-in GbE LAN port A to go to AdvancedTCA
backplane Fabric Channel 1, Port 0.
Actual LAN B Port State Displays port state based on E-key granting from the
AdvancedTCA shelf manager.
Fabric LAN B Port Setting Disabled
Fabric Ch2 Port
0
Select built-in GbE LAN port B to go to AdvancedTCA
backplane Fabric Channel 2, Port 0.
Actual AdvancedMC B1
Port 0 State Displays port state based on E-key granting from the
AdvancedTCA shelf manager.
AdvancedMC B1 Port 0
Setting Disabled
Fabric Ch1 Port 1 Select AdvancedMC B1 GbE LAN port 0 to go to
AdvancedTCA backplane Fabric Channel 1, Port 1.
Actual AdvancedMC B1
Port 1 State Displays port state based on E-key granting from the
AdvancedTCA shelf manager.
AdvancedMC B1 Port 1
Setting Disabled
Fabric Ch2 Port 1 Select AdvancedMC B1 GbE LAN port 1 to go to
AdvancedTCA backplane Fabric Channel 2, Port 1.
Actual AMC B2 Port 0
State Displays port state based on E-key granting from the
AdvancedTCA shelf manager.
AMC B2 Port 0 Setting Disabled
Fabric Ch1 Port 0 Select AdvancedMC B2 GbE LAN port 0 to go to
AdvancedTCA backplane Fabric Channel 1, Port 0.
Actual AMC B2 Port 1
State Displays port state based on E-key granting from the
AdvancedTCA shelf manager.
AMC B2 Port 1 Setting Disabled
Fabric Ch2 Port 0 Select AdvancedMC B2 GbE LAN port 1 to go to
AdvancedTCA backplane Fabric Channel 2, Port 0.
Note: Bold text indicates default setting.
Note: To enable ports to the AdvancedTCA backplane, you need E-key granting from the Adv ancedT CA shelf
manager. If the shelf manager rejects the request, the ports will not be enabled even though the
BIOS has configured them.