Intel NetStructure® MPCBL0010 Single Board Computer
October 2006 Technical Product Specification
Order Number: 304120 69
BIOS Setup—MPCBL0010 SBC
5
7.3.4 ACPI Configuration Sub-Menu
To access this sub-menu, select Advanced on the menu bar, then ACPI
Configuration.
Table 32. SuperIO Configuration Sub-Menu
Feature Options Description
ICH Serial Port1 Address
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Set serial port 1 address and interrupt.
ICH Serial Port2 Address
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Set serial port 2 address and interrupt.
PLD POD Devicer Disabled
Enabled Enable to use on-board LPT port to program PLD with POD
device.
Parallel Port Address
Disabled
378
278
3BC
Select Parallel Port Address
Parallel Port Mode
Normal
Bi-Directional
ECP
EPP
ECP & EPP
Set the parallel port mode.
Parallel Port IRQ IRQ5
IRQ7 Set parallel port interrupt.
Note: Bold text indicates default setting.
Main Advanced PCIPnP Boot Security Chipset Exit
CPU Configuration
IDE Configuration
SuperIO Configuration
ACPI Configuration
System Management
Event Log Configuration
MPS Configuration
ATCA Channel Routing (PICMG)
On-board Devices Configuration
PCI Express Configuration