Intel NetStructure® MPCBL0010 Single Board Computer
October 2006 Technical Product Specification
Order Number: 304120 37
Specifications—MPCBL0010 SBC
4.0 Specifications
This section defines the Intel NetStructure® MPCBL0010 Single Board Computer
operating and storage environments. It also documents the procedures followed to
determine the reliability of the MPCBL0010 SBC.

4.1 Mechanical Specifications

4.1.1 Board Outline

The MPCBL0010 SBC form factor is mechanically compliant to PICMG 3.0 specification
of 322.25 mm x 280.00 mm (12.687" x 11.024"). The board pitch is 6HP, and the PCB
thickness is 2.0 mm (+/-0.2 mm).

4.1.2 Backing Plate and Top Cover

The MPCBL0010 SBC has a rugged metal backing plate that forms a single-piece
faceplate. This backing plate is made of stainless steel (SS304) and is approximately
0.65 mm thick on bottom, and 1.0 mm thick at the faceplate. The top cover is made
from stainless steel (SS304) and is approximately 0.65 mm thick. A removable cutout
is provided in the top cover for easy access to memory modules.The solid backing plate
and top cover provides PCB stiffening, enhanced EMI protection from adjacent boards,
and protection during flame tests.
Caution: Removing the backing plate can damage the components on the board and may void
the warranty. No user-serviceable parts are available under the PCB. Do not remove
the face plate/backing plate.

4.2 Environmental Specifications

The MPCBL0010 SBC meets the board-level specifications as specified in the Intel
Environmental Standards Handbook – Telco Specification, Document #A78805-01. The
test methodology is a combination of Intel and NEBs test requirements with the intent
that the product will pass pure system-level NEBs testing. Intel will not be completing
NEBs testing on the SBC. The following table summarizes environmental limits, both
operating and nonoperating.
Table 5. Environmental Specifications (Sheet 1 of 2)
Parameter Conditions Detailed Specification
Tempe rat ure
(Ambient)
Operating 0 to 55° C
Storage -40 to 70° C
Airflow Operating 30 cubic feet per minute (CFM) minimum
Humidity Operating 15%-90% (non-condensing) at 55° C
Storage 5%-95% (non-condensing) at 40° C