Intel MPCBL0010 On-Board Connectors, Post Code Connector J13, Post Code Connector Pin Assignments

Connectors and LEDs—MPCBL0010 SBC

5.2On-Board Connectors

5.2.1POST Code Connector (J13)

The 8-bit content of I/O address 80h is serialized into a proprietary protocol and the output sent to the J13 connector. In manufacturing, a display board is used to deserialize and display the POST code value on 7-segment LEDs modules.

Table 15. POST Code Connector Pin Assignments

Pin

1

2

3

4

Signal

VCC3

Post:Data

Post:Clock

GND

5.2.2Extended IPT700 Debug Port Connector (J25)

An Extended ITP700 port connection is included to facilitate debug and BIOS/software development efforts. This JTAG connection to the processors utilizes voltage signaling levels that are specific to the Low Voltage Intel® Xeon™ Processor family. These levels must not be exceeded or processor damage may occur. See the Debug Port Design Guide listed in Appendix A, “Reference Documents” for more information.

	Intel NetStructure® MPCBL0010 Single Board Computer
October 2006	Technical Product Specification
Order Number: 304120	47