Toshiba HWS-802H-E Auto Curve Setting, 110, Tsc-F, Set temperature A40 B35 C30 D25 E20 20 T1

4. Auto Curve Setting

FC code setting can make flexible Auto-Curve settings.

<Preparation>

1 Press the TEST and SET and SELECT buttons at the same time for 4 seconds or longer. (See display )

(Make sure that no operation is in progress.)

2 Specify an item code (FC) from among 29 to 2F with the

TEMP. button for temperature setting.

3 Set data with the TIME button for timer setting.

4 Press the SET button. (If lights, the status is confirmed)

5 Repeat 2 through 4 for each item.

6 Pressing the TEST button moves the unit to the normal stop state.

2

3

4 6 1

FC	Item		Details		Fist shipment
29	Outside air temperature T1 temperature	-0015: -15°C	-	0000: 0°C	-0010: -10°C
2B	Outside air temperature T3 temperature	0000: 0°C	-	0015: 15°C	0010: 10°C
2C	Set temperature A with outside air temperature of -20°C	0020: 20°C	-	0055: 55°C	0040: 40°C
2D	Set temperature B with outside air temperature of T1	0020: 20°C	-	0055: 55°C	0035: 35°C
2E	Set temperature C with outside air temperature of 0°C	0020: 20°C	-	0055: 55°C	0030: 30°C
2F	Set temperature D with outside air temperature of T3	0020: 20°C	-	0055: 55°C	0025: 25°C
30	Set temperature E with outside air temperature of 20°C	0020: 20°C	-	0055: 55°C	0020: 20°C
31	Zone2 ratio with Zone1 as Auto	0000: 0%	-	0100: 100%	0080: 80%

TSC-F

Set temperature ()

A(40)

B(35)

C(30)

D(25)

E(20)

-20 T1 (-10)

Auto-Curve

Temperature shift

Default Setting

0 T3 20

(+10)	Outside
	air temperature (TO)

• Auto-Curve temperature shift

Without Auto-Curve individually set, the set temperature can be shifted in the range of ±5k of the current setting. (The set temperature is valid only when Auto operation is in progress.)

1 Press the AUTO TEMP button for 4 seconds or longer. (See display )

	(The remote controller FC setting screen appears.)			2
2
	Set a temperature shift range with the TEMP.
	button for temperature setting. (-5k to 5k)
3	Press the SET	button. (If	lights, the status is
	confirmed)			3	4	1
4	Pressing the TEST	button moves the unit to the normal

stop state.

110