Toshiba HWS-2101CSHM3-E(-UK), HWS-802XWHT6-E, HWS-802H-E, HWS-802XWHM3-E, HWS-3001CSHM3-E(-UK) name

No.

Exchange parts

Work procedure

Remarks

name

6

Compressor

2. Attach the compressor

Compressor lead

1)Attach the compressor in the reverse order of the

Compressor

Wind ferrite core with

removal.

lead

compressor lead for 4 times.

Note)

• Be sure to replace the compressor lead after the

compressor replacement. (Compressor lead

spare parts code: 43160591)

Ferrite core

At this time, wind the ferrite core with the

compressor lead for 4 times.

Bind the compressor lead that is long with a

commercially available binding tie. When doing

this, be careful for the compressor lead not to

contact the discharge pipe.

0 to 50

Bind the lead at 2 positions

• Fix the removed sensors and pulse motor valve

(Compressor lead

with a commercially

coil lead to the outlet and suction pipes through

positioning standard)

available binding tie

the piping cover by using a binding tie. At this

Place soundproofing board (Outward winding)

time, be careful for the sensors and pulse motor

valve coil lead not to contact the discharge pipe.

through between suction pipe and accumulator

(To fix the sensors and leads, use the black

Suction pipe

piping cover for heat resistance and a

commercially available binding tie for heat

resistance.)

• Attach the soundproofing board (Inward

Accumulator

winding, Outward winding), as shown in the right

figure, through between the compressor and

between the piping and parting board.

Header pipe

• Place the compressor lead and the compressor

case thermostat so that they fall into between

the inward winding and outward winding of the

soundproofing board.

Place soundproofing

board (Inward winding)

Overlap soundproofing

through between suction

board (Outward winding)

pipe and header pipe

at this position

Soundproofing

board (Upper)

Piping cover, Binding tie, TS sensor

Outlet pipe

Soundproofing board

(Outward winding)

Do not make gap between soundproofing boards (Upper and Outward winding)

		Black piping cover for heat resistance,
		and Binding tie for heat resistance
		Sensors (TL, TO, TE, TD, TS)
		Pulse motor valve coil lead
		Keep sensors away
		for not contacting outlet pipe
	Suction pipe	Pulse motor valve coil lead
Piping cover, Binding tie
Sensors (TL, TO, TE, TS)
Pulse motor valve coil lead

143