Toshiba HWS-3001CSHM3-E(-UK), HWS-802XWHT6-E, HWS-802H-E, HWS-802XWHM3-E, HWS-2101CSHM3-E(-UK) name

No.	Exchange parts	Work procedure		Remarks
	name
6	Compressor	10) Remove the discharge and suction pipes
	Compressor lead	connected to the compressor by using a burner.			Remove
			Remove
			(Outlet pipe)		(Suction pipe)
		WARNING
		When removing the piping by burning the solder,
		take enough care for a fire going off at the
		moment the wax melts if oil remains inside the
		piping.
		Note)
		Do not make fire flame contact with the 4-way
		valve and pulse motor valve.
		(This may cause an operation failure.)
		11) Pull out the discharge and suction pipes of the
					Compressor bolt
		refrigerant cycle upward.
					(3 bolts)
		12) Remove the compressor bolts that fix the
		compressor to the bottom board. (3 bolts)
		13) Pull the compressor out toward you.
		Note)
		The compressor weighs 15 kg or more.
		Two people should be required to handle it.

142