Toshiba HWS-1402H-E, HWS-802XWHT6-E, HWS-802H-E, HWS-802XWHM3-E, HWS-1402XWHT6-E Exchange parts name

No.	Exchange parts name		Work procedure		Remarks
15	Heater assembly
		To replace a water circuit part, first close the water
		supply source valve and the valve of water pipe
		connected to the hydro unit.
					Nut
	1. How to remove
		1)Perform the step 1-1, step 5, 6, 7, and 11.
		2)Remove the nut of the heater connection.
		3)Remove the 2 fixed screws of the heater.
		4)Pull the heater out upward.
		5)Remove the insulator from the heater.
	2. How to attach
		The heater connection uses a liquid packing for
		water seal. When replacing the heater, use a			Heater
		packing which was slathered with the liquid gasket.			assembly
		Part code		Service parts
		37595721		Packing
		37595722		Liquid gasket
		1)Attach a new heater in the reverse order of the
		removal.
		After the heater assembly replacement repair, open
		the water supply source valve and water piping
		valve to pass water through the hydro unit, and
		check that the heater connection has no water
		leakage.			Insulator

				Heater
				assembly
16 TC sensor	1. How to remove
TWI sensor	1)Perform the step 1-1 and step 5.
TWO sensor	2)Take the sensor out.
THO sensor
		TC sensor		THO sensor
		Sensor diameter:	6	Sensor diameter:	6
		Tube color: Black		Tube color: Gray
				TWO sensor
				Sensor diameter:	6
				Tube color: Red
		TWI sensor
		Sensor diameter:	4
		Tube color: Blue

134