Toshiba HWS-802XWHT6-E 139, Fan motor lead Binding tie Compressor lead, Relay connector

No.	Exchange parts	Work procedure	Remarks
	name
4 Electric parts		2. Reactor
	replacement	1)Perform the step 1-1.
				Relay connector
		2)Remove the relay connector connected to the
		control board.
		3)Cut the binding tie that binds the compressor leads
		and relay connectors.
		4)Remove the reactor.
		(Truss B tight screw Ø4 × 6, 2 screws)
		5)Attach a new reactor.
		Note)
		Be sure to bind the removed binding tie by using
					Control board
		the commercially available binding tie.
		Make sure that the fan motor lead and the reactor
		body do not contact each other.			Reactor body

Fan motor lead

Binding tie

(Compressor lead, Relay connector)

139