Toshiba HWS-1402XWHT6-E, HWS-802XWHT6-E, HWS-802H-E, HWS-1402H-E Hydro unit Function Code Setting

2. Hydro unit Function Code Setting

2-1. How to set function code

<Procedure> Perform the following when no operation is in progress.

1 Press the SET and TEST and SELECT buttons at the same time for 4 seconds or longer. (See display )

2 Specify CODE NO. (FC) with the TEMP.	button
for temperature setting.

3 Select a setting data with the TIME button for timer setting.

The value in the DATA item changes.

4 Press the SET button. (If lights, the status is confirmed)

To change the item to be set, go to 2.

5 Pressing the TEST button moves the unit to the normal stop state.

2

3

4 5 1

2-2. How to set remote controller function code

This operation can set the start and end time of the nighttime low noise, anti bacteria, night set back, or other functions.

<Procedure> Perform the following when no operation is in progress.

1 Press the TEST and CL and TEMP. buttons at the same time for 4 seconds or longer. (See display )

appears on the left.

2 Specify CODE NO. (FC) with the TEMP.	button
for temperature setting.

3 Select a setting data with the TIME button for timer setting.

The value in the DATA item changes.

4 Press the SET button.(If the blinking changes to lit, the status is normal)

To change the item to be set, go to 2.

5 Pressing the TEST button moves the unit to the normal stop state.

2
3
4
1	5

106