Agilent Technologies Agilent E5250A manual Hpe5250aselectCompenFile, Filename

					VXIplug&play Driver
					Driver Functions
	hpe5250a_selectCompenFile
	This function specifies capacitance/conductance compensation data file used to
	compensate C/G by using hpe5250a_compenC.
Syntax	ViStatus _VI_FUNC hpe5250a_selectCompenFile(ViSession vi,
	ViString file_name);
Parameters	vi	Instrument handle returned from hpe5250a_init( ).
	file_name	Compensation data file name. Use absolute path. If the value is
		NULL string, the default data is used.
Remarks	If you change the compensation data, copy the default data shown below, and
	modify the data for your measurement cable. You will need to change the data for
	DATA05 and 06, and/or DATA07 and 08 corresponding to your cables. To measure
	and change the compensation data, refer to Chapter 6. To get the R, L, and C value,
	measure R, L, and C of the cable using the 4284A, and divide them by cable length
	(in m). Compensation data must be the value for 1 m length. Do not change the data
	format in the file.
	# E5250A C Compensation coefficient data table
	#
	# CAUTION : Do not add or delete "REVISION" line and "DATAxx" line.
	#	Change the value for R,L,C of DATA05,06,07 or 08.
	#
	REVISION	A.03.00
	#	R [ohm]	L [H]	C [F]
	DATA00	74.65E-3	140.00E-9	58.44E-12	# Frame Path 1
	DATA01	75.41E-3	90.00E-9	67.13E-12	# Frame Path 2
	DATA02	231.41E-3	450.00E-9	178.85E-12	# Card Path High
	DATA03	177.56E-3	390.00E-9	135.45E-12	# Card Path Low
	DATA04	100.70E-3	400.00E-9	80.00E-12	# Triax Cable	[/m]
	DATA05	100.70E-3	400.00E-9	80.00E-12	# User Triax Cbl H [/m]
	DATA06	100.70E-3	400.00E-9	80.00E-12	# User Triax Cbl L [/m]
	DATA07	114.00E-3	544.00E-9	130.00E-12	# User Coax Cbl H	[/m]
	DATA08	114.00E-3	544.00E-9	130.00E-12	# User Coax Cbl L	[/m]
	DATA09	0.00E-3	0.00E-9	1.20E-12	# Stray Capacitance
	# END of Data

Agilent E5250A User’s Guide, Edition 9 8-29