Controlling the E5250A

Using Virtual Front Panel Utility

You can define labels to use for the input ports of each row in the MEMORY SETUP PANEL. Refer to “Defining Labels for the E5250A Input Ports” on page 5-31.

The following softkeys are displayed for MEMORY SETUP PANEL:

Softkey

Description

 

 

CHANGE

For changing the settings in the Current Setup Memory. See

CHAN

later. Displays cursor for input-output crosspoints and some

 

softkeys.

 

 

COMMENT

For entering a comment for the setup memory. See next page.

 

 

NEXT

(Displayed only for NORMAL Config mode, not AUTO Config

CARD

mode.) Displays MEMORY SETUP PANEL of next card for

 

changing settings.

 

 

SWITCH

(Displayed only for AUTO Config mode, not NORMAL Config

PAGE

mode.) Displays other page of MEMORY SETUP PANEL if

 

more than 48 output ports. This softkey is displayed if the

 

E5250A is configured for multiplexer that has more than 48

 

outputs (example, 2⋅96 multiplexer). This softkey toggles

 

between the MEMORY SETUP PANEL for outputs 1 to 48, and

 

for 49 to 96.

 

 

NEXT

Changes the Current Setup Memory to next setup memory

SETUP

number. Increases the Current Setup Memory number by 1. And

 

changes the E5250A to the new settings.

 

 

PREV

Changes the Current Setup Memory to previous setup memory

SETUP

number. Decreases the Current Setup Memory number by 1. And

 

changes the E5250A to the new settings.

 

 

GOTO

For changing the E5250A to settings of specified setup memory.

SETUP

See later. Changes Current Setup Memory to specified setup

 

memory number.

 

 

SETUP

Returns to the SETUP MEMORY MENU.

MEMORY

 

 

 

5-38

Agilent E5250A User’s Guide, Edition 9

Page 132
Image 132
Agilent Technologies Agilent E5250A manual Chan