Agilent Technologies Agilent E5250A manual Using the Self-Test Utility, Requirements

Executing Self-Test and Leak Test

Using the Self-Test Utility

Using the Self-Test Utility

The Self-Test Utility is a Self-Test program for the E5250A, and runs on the Agilent 4155/4156's built-in IBASIC controller.

Self-Test Utility can execute all Self-Test items listed in Table 3-1 and can also execute the Leak Test, which checks leakage current of the E5250A with installed cards. You execute the Self-Test items and Leak Test interactively (using softkeys) from the 4155/4156.

This section explains the operation of the Self-Test Utility.

•“Requirements”

•“To Start the Self-Test Utility”

•“To Execute Self-Test”

•“To Execute Leak Test”

Requirements

	The following equipment is required to execute the Self-Test Utility:
Table 3-3	Required Equipment
	Agilent	Description	Qty.	Usage
	Model/Part No.
	4155 or 4156	Semiconductor	1	Executing
		Parameter Analyzer		Self-Test
				Utility
	10833A/B/C	GPIB Cable	1
	E5250-17003	E5250A Program	1
		Disk (furnished)
	E5250A-301	Relay Test Adapter	1	Relay Test
	(E5250-60002)
	1250-0929	BNC Short Cap	3 for each E5255A
			(furnished with the
			E5255A)

3-10 Agilent E5250A User’s Guide, Edition 9