Appendix J Troubleshooting
J.10.8 Connection Management Problems
•J.10.8.4.14 Cmgrd—Addition Errors: Provisioning a Connection Results in "Vpi/vci ranges retrieval from svc_operation failed" Error, page J-102
•J.10.8.4.15 Cmgrd—Addition/Modification/Deletion Errors: Provisioning a Connection Results in "Can't get segment info from Data-base." Error, page J-103
•J.10.8.4.16 Cmgrd—Switch Errors, page J-103
•J.10.8.4.17 Cmgrd—Addition and Modification Errors: Provisioning a Connection Results in "Agent reported bad/wrong value for one of the variables in the request." Switch Error, page J-103
•J.10.8.4.18 Cmgrd—Addition Errors: Provisioning a Connection Results in "Object Exists on the Agent or Specified VPI/VCI not available." Switch Error, page J-104
•J.10.8.4.19 Cmgrd—Addition/Modification Errors: Provisioning a Connection Results in "Requested cell rate (lscr/lpcr or rpcr/rscr ) is too high" Switch Error, page J-104
•J.10.8.4.20 Cmgrd—Addition Errors: Provisioning a Connection Results in "SPVC is not allowed on this interface" Switch Error, page J-105
•J.10.8.4.21 Cmgrd—Addition Errors: Provisioning a Connection Results in "Local Channels not enough." Switch Error, page J-105
•J.10.8.4.22 Cmgrd—Addition and Modification Errors: Provisioning a Connection Results in "Error in Traffic Parameters." Switch Error, page J-105
•J.10.8.4.23 Cmgrd—Addition, Modification, and Deletion Errors: Provisioning a Connection Results in "Network Busy, try later" Switch Error, page J-106
•J.10.8.4.24 Cmgrd—Modification Errors: Modifying a Connection Results in "Connection does not exist in CproDb/Agent returned no such name" Switch Error, page J-106
J.10.8.4.1 High-Level Connection Management Subsystem Architecture
Figure J-6gives a high-level view of the Connection Management Subsystem.
Figure J-6 Connection Management Subsystem
CM Clients
Related key index entries: connproxy, cmserver, xcmgrd, cmgrd
The Connection Management Subsystem comprises the following modules:
Cisco Transport Manager Release 6.0 User Guide
