Cisco Systems 78-16845-01 appendix CTM Does Not Collect Historical PM Data for the CRS-1

Appendix J Troubleshooting

J.8.6 CTM Does Not Collect Historical PM Data for the CRS-1

...
sys	5	5
...
vmps	2	2
vtp	2	2

0(emergencies)	1(alerts)	2(critical)
3(errors)	4(warnings)	5(notifications)
6(information)	7(debugging)

J.8.6 CTM Does Not Collect Historical PM Data for the CRS-1

Step 1 Verify that PM collection is enabled for the CRS-1. To do this, go to the Network Element Properties > Status tab and in the PM Collection area, check the 15 Min check box. Click Save. Also, verify that the CRS-1 PM Service Status is Active in the Control Panel window.

Step 2 Enter the following commands to verify that the correct PM configuration is in the running configuration on the CRS-1:

Router(config)# show run perf

performance-mgmt resources tftp-server <IP_address_of_server> directory <directory_on_TFTP_server>

performance-mgmt statistics bgp template default sample-size 1

sample-interval 15

!

performance-mgmt statistics mpls ldp template default sample-size 1

sample-interval 15

!

performance-mgmt statistics node cpu template default sample-size 1

sample-interval 15

!

performance-mgmt statistics interface generic-counters template default sample-size 1

sample-interval 15

!

performance-mgmt statistics interface data-rates template default sample-size 1

sample-interval 15

!

performance-mgmt statistics mpls TE-link template default sample-size 1

sample-interval 15

!

performance-mgmt statistics node memory template default sample-size 1

sample-interval 15

!

performance-mgmt statistics node process template default sample-size 1

sample-interval 15

!

performance-mgmt statistics mpls TE-tunnel template default sample-size 1

sample-interval 15

!

performance-mgmt statistics mpls interface template default sample-size 1

Cisco Transport Manager Release 6.0 User Guide

78-16845-01 J-25