2-951
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show logging callhome severity
show logging callhome severity
To display the severity level at which point syslog messages are sent to specified destination addresses,
use the show logging callhome severity command.
show logging callhome severity
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display the severity level at which point syslog messages are sent to specified
destination addresses:
Console> (enable) show logging callhome
Callhome Severity: LOG_ERR(3)
Console> (enable)
Related Commands clear logging callhome severity
set logging callhome
set logging callhome destination
set logging callhome from
set logging callhome reply-to
set logging callhome severity
show logging callhome
show logging callhome destination
show logging callhome from
show logging callhome reply-to
show logging callhome smtp-server