2-404
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set logging timestamp
set logging timestamp
To enable or disable the time-stamp display on system logging messages, use the set logging timestamp
command.
set logging timestamp {enable | disable}
Syntax Description
Defaults By default, system message logging time-stamp is enabled.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to enable the time-stamp display:
Console> (enable) set logging timestamp enable
System logging messages timestamp will be enabled.
Console> (enable)
This example shows how to disable the time-stamp display:
Console> (enable) set logging timestamp disable
System logging messages timestamp will be disabled.
Console> (enable)
Related Commands show logging
enable Enables the time-stamp display.
disable Disables the time-stamp display.