Cisco Systems OL-6244-01 show cam notification

2-814
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show cam notification
show cam notification
To display the status of CAM table notifications, notification intervals, and MAC addresses added and
deleted, use the show cam notification command.
show cam notification {all | counters | enable | historysize | interval | move | threshold |
mod/port}
show cam notification history [{[-]number_of_log_entries}]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display CAM notification counters:
Console> show cam notification counters
MAC addresses added = 3
MAC addresses removed = 5
MAC addresses added overflowed = 0
MAC addresses removed overflowed = 0
MAC address SNMP traps generated = 0
Console>
This example shows how to display CAM notification feature information:
Console> show cam notification enable
MAC address change detection enabled
Console>
all Displays the CAM notification counters, enable, interval, and historysize
information.
counters Displays CAM notification counter information.
enable Displays CAM notification feature information.
historysize Displays the size of the CAM notification log.
interval Displays the CAM notification interval.
move Displays MAC move notification status.
threshold Displays CAM usage monitoring status and parameters.
mod/port Number of the module and port.
history Displays CAM notification history logs.
-(Optional) Specifies the most recent log entries.
number_of_log_entries (Optional) Number of the CAM notification log entries to display; if a
CAM notification log number is not specified, the entire log is displayed.