2-1132
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show qos acl map
show qos acl map
To display the ACL mapping information, use the show qos acl map command.
show qos acl map {config | runtime} {acl_name | mod/port | vlan | all | all-vlans | all-ports}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines You can enter the config keyword to display information that was configured throu gh the CLI and saved
in NVRAM, regardless of the current runtime information.
Note When a switchover occurs, you cannot view the ACLs and policers deployed using COPS-DS until the
COPS-DS client on the new active supervisor engine establishes connection to the PDP and downloads
the QoS policy. The runtime fields in the output display will be blank until QoS policy is do wnload ed to
the new active supervisor engine.
Examples This example shows how to display information for all ACLs:
Console> show qos acl map all
ACL name Vlan # Ports
-------- ----------------- -----------------------------
web-acc 1,4-7
isp1 2 1/1
Console>
config Displays NVRAM QoS information.
runtime Displays QoS runtime information.
acl_name Name of the list.
mod/port Number of the module and the port.
vlan VLAN list.
all Displays information regarding all ACLs.
all-vlans Displays all ACL-to-VLAN mapping.
all-ports Displays all ACL-to-port mapping.