2-340
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set igmp fastleave
set igmp fastleave
To enable or disable Internet Group Management Protocol (IGMP) fastleave processing, use th e
set igmp fastleave command.
set igmp fastleave {enable | disable}
Syntax Description
Defaults The default is disabled.
Command Types Switch command.
Command Modes Privileged.
Examples This command shows how to enable IGMP fastleave processing:
Console> (enable) set igmp fastleave enable
IGMP fastleave set to enable.
Warning: Can cause disconnectivity if there are more than one host joining the same group
per access port.
Console> (enable)
This command shows how to disable IGMP fastleave processing:
Console> (enable) set igmp fastleave disable
IGMP fastleave set to disable.
Console> (enable)
Related Commands clear igmp statistics
set igmp
show multicast protocols status
enable Enables IGMP fastleave processing.
disable Disables IGMP fastleave processing.