2-705
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set spantree mst config
Examples This example shows how to configure an MST region and to give that region a name and revision
number:
Console> (enable) set spantree mst config name test-lab revision 10
Edit Buffer modified. Use 'set spantree mst config commit' to apply the
changes
Console> (enable)
This example shows how to put the new MST VLAN mapping into effect:
Console> (enable) set spantree mst config commit
Console> (enable)
This example shows how to discard MST region configuration when you hold the MST ed it buffer:
Console> (enable) set spantree mst config rollback
Console> (enable)
This example shows how to unlock the MST edit buffer when it is held by another user:
Console> (enable) set spantree mst config rollback force
Console> (enable)
This example shows the message that displays on the console if the switch is either a non-primary server
or a client for the MST feature:
Console> (enable) set spantree mst config commit
MST configuration cannot be changed on a non primary server
Console> (enable)
Related Commands clear spantree mst
show spantree mst
show spantree mst config