2-119
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear qos policed-dscp-map
clear qos policed-dscp-map
To reset the policer-to-dscp mapping table to the defaults, use the clear qos policed-dscp-map.
clear qos policed-dscp-map [normal-rate | excess-rate]
Syntax Description
Defaults The default is the identity function; for example, DSCP 63 to policed DSCP 63 and DSCP 62 to policed
DSCP 62.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you do not specify the normal-rate keyword or the excess-rate keyword, only normal rate mappings
are cleared and restored to the default settings.
Examples This example shows how to reset the normal rate mapping to the default settings:
Console> (enable) clear qos policed-dscp-map
QoS normal-rate policed-dscp-map setting restored to default.
Console> (enable)
This example shows how to reset the excess rate mapping to the default settings:
Console> (enable) clear qos policed-dscp-map excess-rate
QoS excess-rate policed-dscp-map setting restored to default.
Console> (enable)
Related Commands set qos po liced-dscp-map
show qos maps
normal-rate (Optional) Restores the map associated with the normal rate to the default value. See
the “Usage Guidelines” section for more information.
excess-rate (Optional) Restores the map associated with the excess rate to the default value.