2-1045
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port capabilities
Table 2 -71 describes the possible fields (dep ending on t he type of por t queried ) and the values in th e
show port capabilities command output.
Table2-71 show port capabilities Command Output Fields
Field Description
Model Module model number.
Port Module number and port number.
Type1Port t y pe (1 000 BASE-SX or 1 00BASE-FX).
Auto MDIX Status of whether the port supports the automatic Media-Dependent
Interface Crossover (MDIX) function (yes, no).
Auxiliaryvlan2Status of whether the port supports voice VLANs (yes, no).
Broadcast
suppression Percentage of total available bandwidth that can be used by br oadc ast
traffic (0–100).
Channel Status of which ports can form a channel group. The ports are shown in
mod/port format. For example, 3/1-2 indicates module 3, ports 1 and 2.
Also, any ports in range [mod/1-mod/high_port] or no ports may be
indicated.
COPS port group Status of whether the port supports COPS port group (not supported, po rts
that are supported).
CoS rewrite Status of whether the port supports CoS rewrite (yes, no).
Dot1q-all-tagged Status of whether the port supports the 802.1Q tagging feature (yes, no).
Duplex Duplex mode (half, full, auto).
Fast start Status of whether the spanning tree PortFast-start feature on the port is
enabled (yes,no).
Flow control Flow-control options you can set (receive-[off, on, desired], send-[off, on,
desired], orno).
Inline power2Status of whether the port supports inline power (yes, no).
Jumbo Frames Status of whether the port supports Jumbo Frames (yes, no).
Link debounce
timer Status of whether the port supports debounce timer (yes, no).
Link debounce
timer delay Status of whether the port supports the link debounce timer delay (yes, no).
Membership Method of membership assignment of a port or range of ports to a VLAN
(static, dynamic).
Port ASIC group Ports controlled by a port ASIC.
Port VLAN
Mapping Ports that support VLAN mapping and the maximum number of ma ppings
allowed.
QOS classification Status of whether the port supports QoS classification (yes, no).
QOS scheduling Status of whether the port supports QoS scheduling (yes, no).
Security Status of whether port security is enabled (yes, no).
SPAN SPAN type supported.
Speed1Speed setting for the port (auto, 10, 100, 1000).