2-495
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set port gmrp
set port gmrp
To enable or disable GMRP on the specified ports in all VLANs, use the set port gmrp command.
set port gmrp mod/port {enable | disable}
Syntax Description
Defaults The default is GMRP is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
You can enter this command even when GMRP is not e nabled, b ut the v al ues come into ef fe ct only wh en
you enable GMRP using the set gmrp enable command.
Examples This example shows how to enable GMRP on module 3, port 1:
Console> (enable) set port gmrp 3/1 enable
GMRP enabled on port(s) 3/1.
GMRP feature is currently disabled on the switch.
Console> (enable)
This example shows how to disable GMRP on module 3, ports 1 through 5:
Console> (enable) set port gmrp 3/1-5 disable
GMRP disabled on port(s) 3/1-5.
Console> (enable)
Related Commands show gmrp configuration
mod/port Number of the module and the port on the mod ule.
enable Enables GVRP on a specified port.
disable Disables GVRP on a specified port.