2-76
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear mls nde
clear mls nde
To clear primary and secondary NDE collector destinations and to disable NDE, use the clear mls nde
command.
clear mls nde [IP_address port]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines Entering the clear mls nde command without an IP address and port number clears both primary and
secondary NDE collector destinations and disables NDE. To clear a specific NDE collector destination,
you must specify an IP address and port for the destination. If the IP address does not specify a valid
NDE collector destination, the command is rejected.
Examples This example shows how to clear both the primary and se cond ar y c oll ect ors:
Console> (enable) clear mls nde
Collector’s IP address cleared.
Secondary Collector IP address cleared.
Console> (enable)
This example shows how to clear a specific collector destination:
Console> (enable) clear mls nde 10.6.1.10 9939
Cleared Collector IP 10.6.1.10 port 9939
Console> (enable)
This example shows the message that displays when the IP address does not specify a valid NDE
collector destination:
Console> (enable) clear mls nde 10.6.1.10 1111
Specified address not a valid collector
Console> (enable)
Related Commands set mls nde
show mls nde
IP_address (Optional) IP address of a specific NDE collector destination.
port (Optional) Port of a specific NDE collector destination.