2-144
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear snmp targetparams
clear snmp targetparams
To clear the SNMP target parameters used in the snmpTargetParamsTable, use the clear snmp
targetparams command.
clear snmp targetparams [-hex] {paramsname}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you use special characters for the paramsname value (nonprintable delimiters for this parameter), you
must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for
example, 00:ab:34.
Examples This example shows how to remove the SNMP target parameters:
Console> (enable) clear snmp targetparams joe
Cleared SNMP targetparams table joe.
Console> (enable)
Related Commands set snmp targetparams
show snmp targetparams
-hex (Optional) Displays the paramsname value as a hexadecimal format.
paramsname Name of the target parameter in the snmpTargetParamsTable; the maximum length is
32 bytes.