2-398
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set logging level
Defaults The default is facility is set to all, and level is set to 0.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines You can also set the logging level by using the set logging server command.
If you do not use the default keyword, the specified logging level applies only to the current session.
spantree Spanning Tree Protocol
sys System
tac Terminal Access Controller
tcp Transmission Control Protocol
telnet Terminal Emulation Protocol
tftp Trivial File Transfer Protocol
udld User Datagram Protocol
vmps VLAN Membership Policy Server
vtp Virtual Terminal Protocol
Table2-15 Severity Level Definitions
Severity Level Description
0—emergencies System unus abl e
1—alerts Immediate action required
2—critical Critical condition
3—errors Error conditions
4—warnings Warning conditions
5—notifications Normal bug significant condition
6—informational Informational messages
7—debugging Debugging messages
Table2-14 Facility Types (continued)
Facility Name Definition