2-616
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set rspan
If you provide a session number, but the same session number for the same session type is present in the
SPAN database already, the session number that you enter overwrites the SPAN session with the same
number. If the same session number is already present in the database, but that session number is for a
different session type, the session number that you enter is rejected.
If you provide a session number that does not exist in the SPAN database, the number is regarded as a
new SPAN session request and is subject to SPAN session limits.
Examples This example shows how to disable all enabled source sessions:
Console> (enable) set rspan disable source all
This command will disable all remote span source session(s).
Do you want to continue (y/n) [n]? y
Disabled monitoring of all source(s) on the switch for remote span.
Console> (enable)
This example shows how to disable one source session to a specific VLAN:
Console> (enable) set rspan disable source 903
Disabled monitoring of all source(s) on the switch for rspan_vlan 903.
Console> (enable)
This example shows how to disable all enabled destination sessions:
Console> (enable) set rspan disable destination all
This command will disable all remote span destination session(s).
Do you want to continue (y/n) [n]? y
Disabled monitoring of remote span traffic on ports 9/1,9/2,9/3,9/4,9/5,9/6.
Console> (enable)
This example shows how to disable one destination session to a specific port:
Console> (enable) set rspan disable destination 4/1
Disabled monitoring of remote span traffic on port 4/1.
Console> (enable)
Related Commands show rspan