2-540
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set port vlan-mapping
This example shows how to enable port VLAN mapping and to configure VLAN ma ppin g o n a n
individual port. In this example, module 7 is the 48-port 10/100/1000 switching module
(WS-X6748-GE-TX). This module supports per-ASIC VLAN mapping; 1 A SIC sup port s 1 2 p orts.
Console> (enable) set port vlan-mapping 7/1 enable
VLAN mapping enabled on port 7/1.
Console> (enable) set port vlan-mapping 7/1 2002 3003
VLAN 2002 mapped to VLAN 3003 on ports 7/1-12.
Console> (eanble)
In this example, module 5 is the 1-port 10GBASE-E serial 10-Gigab it E th erne t mo dule
(WS-X6502-10GE). This module supports per-port VLAN mapping.
Console> (enable) set port vlan-mapping 5/1 2002 3003
VLAN 2002 mapped to VLAN 3003 on port 5/1.
Console> (enable)
In this example, module 7 is the 48-port 10/100/1000 switch ing mod ule (W S-X674 8-G E-T X ). Th i s
module supports per-ASIC VLAN mapping; 1 ASIC supports 12 ports. In this example, ports 7/1-4 are
part of an EtherChannel.
Console>(enable) set port vlan-mapping 7/1 2002 3003
VLAN 2002 mapped to VLAN 3003 on ports 7/1-12.
Console>(enable)
Related Commands clear port vlan-mapping
show port vlan-mapping