2-569
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set qos cos-cos-map
set qos cos-cos-map
To set the CoS-to-CoS mapping on a global basis, use the set qos cos-cos-map command.
set qos cos-cos-map cos1 cos2 ... cos8
Syntax Description
Defaults The default CoS-to-CoS configuration is listed in Table 2- 18.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If QoS is disabled, this message displays when you attempt to define a CoS-to-CoS mapping:
QoS is disabled, changes will take effect after QoS is enabled.
Examples This example shows how to set the CoS-to-CoS mapping:
Console> (enable) set qos cos-cos-map 0 1 2 3 4 4 6 7
QoS cos-cos-map set successfully.
Console> (enable)
Related Commands clear qos cos-cos-map
show qos maps
cos# CoS value; valid values are from 0 to 7.
Table2-18 CoS-to-CoS Mapping
CoS 01234567
CoS 01234567