2-998
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show moduleinit
show moduleinit
To display contents of the information stored in the system module initiation log, use the show
moduleinit command.
show moduleinit [mod] [log lognum | -logcount]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a module number, contents for all modules are shown.
Examples This example shows how to show the last two log entries for module 1:
Console> show moduleinit 1 log -2
Module 1: Number of Logs: 3
Log #2:
State 1: Entry/Exit/Elapse Time: 14721/14721/0
Success_Exit
State 2: Entry/Exit/Elapse Time: 14721/14721/0
Success
State 3: Entry/Exit/Elapse Time: 14721/32223/17502
Success_Exit
Log #3:
State 1: Entry/Exit/Elapse Time: 38302/38302/0
P_PortConfigTokenRingFeatures()
ConfigModule()
State 2: Entry/Exit/Elapse Time: 38302/38302/0
Success
State 3: Entry/Exit/Elapse Time: 38302/38310/8
Success_Exit
Console>
mod (Optional) Number of the module.
log (Optional) Specifies a specific log.
lognum (Optional) Number of the log to display.
-logcount (Optional) Number of previous logs to display.