2-1094
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port security-acl
show port security-acl
To display the port access control list (PACL) mode and the status of a PACL merge operation, use the
show port security-acl command.
show port security-acl mod/port
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The show port security-acl command displays PACL information for a specific port. The command
output displays both configuration and runtime information. Configuration i nform at ion shows wha t i s
stored in the NVRAM; runtime information shows what is programmed in the hardware.
The output also displays the status of the merge operation. The sta tus ca n be a s f ollows:
•active—There is a PACL configured on the port and it is successfully merged with the VLAN.
•inactive—There is no PACL configured on the port.
•disabled—There is a PACL configured on the port, but the merge was unsuccessful (for any number
of reasons).
The show port security-acl command also displays the VLAN with which the port is configured to
merge.
Examples This example shows how to display PACL information for port 3/1:
Console> (enable) show port security-acl 3/1
Port Interface Type Interface Type Interface Merge Status
config runtime runtime
----- -------------- -------------- ----------------------
3/1 merge merge (VLAN=2) disabled
Config:
Port ACL name Type
----- -------------------------------- ----
3/1 ipacl1 IP
Runtime:
Port ACL name Type
----- -------------------------------- ----
No ACL is mapped to port 3/1.
mod/port Number of the module and the port on the mod ule.