2-278
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set boot sync timer
set boot sync timer
To specify an amount of time for the image s ynchroniz ation timer , us e the set boot sync timer command.
set boot sync timer nsec
Syntax Description
Defaults The default is 120 seconds.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The se t boot sync timer command is used to specify an image synchronization timer amount. After the
specified amount of time has passed, a process begins to synchronize the image on the redundant
supervisor engine with the image on the active supervisor engine if the images are not identical.
If you enter the set boot sync now command, the timer is bypassed, and the synchronization process
begins immediately.
Examples\ This example shows how to set the image synchronization timer t o 300 s ec ond s:
Console> (enable) set boot sync timer 300
Image auto sync timer set to 300 seconds.
Console> (enable)
Related Commands set boot sync now
show boot
nsec Timer amount in seconds; valid values are from 10 to 7200 seconds.