2-876
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show fabric channel
show fabric channel
To display Switch Fabric Module information, use the show fabric channel command.
show fabric channel counters {mod | all} [hex]
show fabric channel utilization
show fabric channel switchmode [mod]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The term “CEF720” refers to any module that has a part number that conforms to WS-X67xx-xxx (such
as WS-X6724-SFP). These modules connect to the integrated 720-Gbps switch fabric on the
Supervisor Engine 720 and to the 32-Gbps switching bus.
Note The integrated 720-Gbps switch fabric is supported only on Supervisor Engine 720.
The term “CEF256” refers to any module that has a part number that c onforms to WS-X65xx-xxx (such
as WS-X6548-GE-TX), the Optical Services Modules, the enhanced FlexWAN module, and most service
modules (such as the FWSM, the SSLM, the VPNSM, the NAM-1, the NAM-2, the IDSM-2, the CSG,
and the CMM). These modules connect to either the integrated 720-Gbps sw itch fabric on the Supervisor
Engine 720 or to the external 256-Gbps Switch Fabric Modules that are supported by the
Supervisor Engine 2, and these modules connect to the 32-Gbps switching bus.
Note The external Switch Fabric Modules are supported only with Supervisor Engine 2 in the
Catalyst 6500 series switch.
A non-fabric-enabled module is not included in the CEF720 or CEF256 categories. Th ese modules have
no fabric connections and connect only to the 32-Gbps switching bus.
counters Displays fabric channel counter information.
mod Number of the fabric-enabled module.
all Displays counters for all fabric-enabled modules.
hex (Optional) Displays counters in hexadecimal format.
utilization Displays fabric channel utilization information.
switchmode Displays switch mode and fabric channel status.