2-147
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear snmp view
clear snmp view
To remove the MIB view entry from the v acmV ie wT reeF amilyTable, use the clear snmp view command.
clear snmp view [-hex] {viewname subtree}
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you use special characters for the viewname value (nonprintable delimiters for this parameter), you
must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for
example, 00:ab:34.
A MIB subtree used with a mask defines a view subtree that can be in OID format or a text name mapped
to a valid OID.
Examples This example shows how to clear the SNMP MIB viewname:
Console> (enable) clear snmp view myview 1.1.3
Cleared snmp view myview with subtree 1.1.3
Console> (enable)
Related Commands se t snmp vie w
show snmp view
-hex (Optional) Displays the viewname value as a hexadecimal format.
viewname Name of a MIB view.
subtree Name of the subtree.