2-410
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set mls cef load-balance
set mls cef load-balance
To include or exclude Layer 4 ports in a load-balancing hash, use the set mls cef load-balance
command.
set mls cef load-balance {full | source-destination-ip}
Syntax Description
Defaults By default, the load-balancing hash is based on source and destination IP addresses.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines When multiple paths are available to reach a destination, the new hash is used to choose the path to be
used for forwarding.
Examples This example shows how to base the hash on Layer 4 ports and source and destination IP addresses:
Console> (enable) set mls cef load-balance full
Console> (enable)
This example shows how to base the hash on source and destination IP addresses:
Console> (enable) set mls cef load-balance source-destination-ip
Console> (enable)
Related Commands show mls
full Bases the hash on Layer 4 ports and source and destination IP addresses.
source-destination-ip Bases the hash on source and destination IP addresses.