2-1096
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port spantree
show port spantree
To view port spanning tree information, use the show port spantree command.
show port spantree [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod valu e, th e ports on a ll mo dules are sho wn. If you do not sp ecify a port value,
all the ports on the module are shown.
Examples This example shows how to display spanning tree information on a specific module:
Console> (enable) show port spantree 5
Port(s) Vlan Port-State Cost Prio Portfast Channel_id
------------------------ ---- ------------- --------- ---- -------- ----------
5/1 1 not-connected 2684354 32 disabled 0
5/2 1 not-connected 2684354 32 disabled 0
5/3 1 not-connected 2684354 32 disabled 0
5/4 1 not-connected 2684354 32 disabled 0
5/5 1 not-connected 2684354 32 disabled 0
5/6 1 not-connected 2684354 32 disabled 0
5/7 1 not-connected 2684354 32 disabled 0
5/8 1 not-connected 2684354 32 disabled 0
5/9 1 forwarding 268435 32 disabled 0
.
.
.
Related Commands show spantree
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.