2-959
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show mls acl-route
show mls acl-route
To display summaries from ACL for routing in the MLS-based Catalyst 6500 series switches, use the
show mls acl-route command.
show mls acl-route
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines This command is supported on Catalyst 6500 series switches configured with the Supervisor Engine 2
with Layer 3 Switching Engine II (PFC2) only.
If you enter any of the show mls commands on Catalyst 6500 series switches without IP or IPX MLS,
one of these warning messages display:
Multilayer switching not supported on feature card.
or
IPX Multilayer switching not supported on feature card.
Examples This example shows how to display summaries from ACL for routing:
Console> show mls acl-route
Total L3 packets forwarded 0
Total L3 octets forwarded 0
Total routed VLANs 0
Total used adjacency entries 0
Console>
Related Commands show mls