2-477
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set port disable
set port disable
To disable a port or a range of ports, use the set port disable command.
set port disable mod/port
Syntax Description
Defaults The default system configuration has all ports enabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
It takes approximately 30 seconds for this command to take effect.
Examples This example shows how to disable a port using the set port disable command:
Console> (enable) set port disable 5/10
Port 5/10 disabled.
Console> (enable)
Related Commands se t port e nable
show port
mod/port Number of the module and the port on the module.