2-829
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show channel hash
show channel hash
To display the channel port the traffic goes to based on the current channel distribution mode, use the
show channel hash command.
show channel hash channel_id src_ip_addr [dest_ip_addr]
show channel hash channel_id dest_ip_addr
show channel hash channel_id src_mac_addr [dest_mac_addr]
show channel hash channel_id dest_mac_addr
show channel hash channel_id src_port dest_port
show channel hash channel_id dest_port
show channel hash channel_id src_ip_addr vlan src_port [dest_ip_addr vlan dest_port]
show channel hash channel_id dest_ip_addr vlan dest_port
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify the channel_id value, EtherChannel information is shown for all channels.
No information is displayed if the channel specified is not in use.
channel_id Number of the channel.
src_ip_addr Source IP address.
dest_ip_addr (Optional) Destination IP address.
src_mac_addr Source MAC address.
dest_mac_addr (Optional) Destination MAC address.
src_port Number of the source port; valid values are from 0 to 65535.
dest_port Number of the destination port; valid values are from 0 to 65535.
vlan Number of the VLAN of the packet.