2-163
Catalyst 6500 Series Switch Command Reference—Release8.4
OL-6244-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear spantree uplinkfast
clear spantree uplinkfast
To turn off the UplinkFast feature and to return the switch priority and port costs to the default setti ngs,
use the clear spantree uplinkfast command.
clear spantree uplinkfast
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines In some cases, this command could cause load balancing on the switch to be lost.
Examples This example shows how to turn off the UplinkFast feature and to return the switch priority to the default
settings:
Console> (enable) clear spantree uplinkfast
This command will cause all portcosts, portvlancosts, and the
bridge priority on all vlans to be set to default.
Do you want to continue (y/n) [n]? y
VLANs 1-1005 bridge priority set to 32768.
The port cost of all bridge ports set to default value.
The portvlancost of all bridge ports set to default value.
uplinkfast disabled for bridge.
Console> (enable)
Related Commands set spantree uplinkfast
show spantree uplinkfast